top of page
MIMESIS 22 H NEXTGEN
Phono Preamplifier
Mimesis 22 H Nextgen
MM22H-NG-rear.jpg

The ideal companion to the Telos 1000 and 2500 NextGen mono amplifiers, Mimesis 22H NextGen astonishing signal accuracy is explained by the multiplication of the paralleling of single class A single-ended stages. Its AC curator technology ensures exceptionally smooth, clean power is delivered to the circuit boards through several successive stages of regulation. Its digital volume control provides additional precision in the gain selection. With 7 inputs and 2 analog tape loops, the Mimesis 22H NextGen allows many system configuration options and integration in home automation systems.

SPECIFICATIONS

INPUT LEVEL
 

  •     Maximum input level (balanced) : 9.6 V RMS.

  •     Maximum input level (unbalanced): 4.8 V RMS.


GROUP DELAY
 

  •     Propagation delay <300 ns stable with frequency from DC to 200 kHz.


DISTORTION
 

  •     1 Vrms output level, 80 KHz measurement bandwidth.

  •     600 ohms termination impedance.

  •     THD unbalanced input to unbalanced output 0002 % flat with frequency.

  •     THD balanced input to balanced output 0001 % flat with frequency.

  •     IMD unbalanced input to unbalanced output 0002 %.

  •     IMD balanced input to balanced output 0001 %.


SPEED
 

  •     Slew rate of the amplification stages: 2500 V/us.

  •     Rise time: < 400 ns.


CROSSTALK
 

  •     Separation: > 105 dB between channels.

  •     (20 Hz – 20 kHz).


NOISE
 

  •     Signal-to noise ratio on line input: > 120 dB (0.01 Hz – 10 MHz).

  •     Weighted ASA A: > 130 dB.


POWER
 

  •     Nominal line voltage: 115 V or 230 V.

  •     Input voltage range: +/- 15 %.

  •     Maximum power consumption: 70 W.


GROUNDING
 

  •     Separated ground and earth signal.

  •     Connection optional between earth and ground to cancel all ground loops.


SAFETY FEATURES
 

  •     Automatic switching to MUTING if the AC line drops or is interrupted.

  •     Automatic protection against tape loops.


FRONT PANEL CONTROLS
 

  •     MUTING/POWER switch with Led control.

  •     VOLUME control.

  •     BALANCE control.

  •     RECORD/MENU switch.

  •     PHASE/EDIT switch.

  •     7 INPUT CONTROL switches (with Led control).


REAR PANEL CONNECTIONS & CONTROLS
 

  •     Power connector.

  •     Earthing post (yellow-green).

  •     Output connectors XLR (right and left) balanced.

  •     Output connectors RCA (right and left) for Tape and Line outputs.

  •     Signal grounding post (black).

  •     Input connectors XLR (right and left) balanced.

  •     Input connectors RCA (right and left) for Tape and line inputs.

  •     Link float.

  •     RS232 Connector.


POWER SUPPLY CONTROLS
 

  •     Main fuse (2.5 A slow-blow).


SIZE & WEIGHT

PREAMPLIFIER:

 

  •     44 W x 16.5 H x 40 D (cm) – 17.3 W x 6.3 H x 15.8 D (inch).

  •     20 kg.


POWER SUPPLY:
 

  •     44 W x 16.5 H x 37.5 D (cm) – 17.3 W x 6.3 H x 14.6 D (inch).

  •     25 kg.


WARRANTY
 

  •     3 years, parts and labor.

bottom of page